BC Battery Controller 700-BT-03 BC TESTER BT-03




BT-03 is a professional tester with an embedded printer, suitable for all 6/12V lead-acid batteries (wet, gel, MF, AGM, VRLA…) from 40 to 2000 CCA (SAE), as well as for 12/24V cranking/charging electrical systems.

Easy to use, it provides accurate and reliable results, which are displayed in few seconds on the LCD display, together with a clear recommended action for the user:

  1. Good & Pass (Battery in good conditions)
  2. Good & Recharge
  3. Recharge & Retest
  4. Bad & Replace
  5. Bad Cell & Replace

The test results can be printed, to provide the customers a written report about the battery and alternator tests which have been executed. The device is also suitable to analyse deeply discharged batteries: in fact, the range of the embedded voltmeter goes from 1.5V to 30V. The user has the possibility to select all the main industry international standards for batteries (SAE, DIN, EN, IEC or JIS). The patented single load, dynamic resistance technology has been developed to minimize the battery drain during the execution of the test procedure. The device comes in a practical ABS case for storing and transporting the unit, and it is provided with a protective rubber shell, thus guaranteeing the highest shock resistance.



Battery Voltage: 6 Volt / 12 Volt

Battery Types: Trad., gel, MF, AGM, VRLA…

Selectable Standards: SAE, EN, JIS, CA, DIN, IEC

Operating Range (Batteries CCA): 40-2000 CCA (SAE), 40-2100 CCA (EN), 30-1500 CCA (IEC), 25-1300 CCA (DIN)

Operating Temperature: -20°C – +50°C

CCA Tolerance: ± 5%

Voltage Tolerance: ± 0.05%

Cable Length: 75 cm

Dimensions: 190x90x115 mm

Weight: 420 gr

Included Batteries: 6×1.5V – LR6 – AA



There are no reviews yet.

Be the first to review “BC Battery Controller 700-BT-03 BC TESTER BT-03”

Your email address will not be published. Required fields are marked *